Register to receive the LiDAR MAG Newsletter  



remove subscribe

LiDAR Magazine Today


follow us on Twitter 

Sponsored By

TAS Lidar Content
TAS Content
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
Sponsored By

Partner Sites

American Surveyor







Spatial Media LLC properties




LinkedIn Group
facebook group

Home   LiDARmag     

In This Issue
• Tumultuous Times  • Points & Pixels  • Landslides  • Drone LIDAR  • Smart Cities  • Hurricane Drones  • Aerial LIDAR  • LIDAR/Camera  • UAS  • Drone Mapping  • Calibrate this!
Articles   View Cover    Click HERE for the PageFlip full version of the magazine.
Topcon Explores Industry Practices and Workflows at Autodesk University
Global Mapper SDK Now Available on Amazon Web Services
GeoCue Adds Puerto Rico Lidar Data to GetLIDAR.com to Support Hurricane Recovery
Autodesk and Esri Partnering to Advance Infrastructure Planning and Design
FARO Announces Acquisition of Dustin Forensics
New Zealand Calls for American Construction and Engineering Help for Record Build
Democratization of BIM: How BIMRAY Maximizes ROI on Building Information Modeling
senseFly Teams Up with Esri to Host Free ‘Drone to GIS’ Webinar
Orbit GT Releases 3D Mapping Feature Extraction Standard v18
DotProduct Partners with Assemble Systems to Provide Field Validation of Tablet-Based Handheld 3D Scanner Data
Statement Regarding the Geospatial Data Act Pending in the U.S. Congress
Golden Software Releases Surfer 2D and 3D Mapping, Modeling, and Analysis Software
RIEGL to Exhibit and Present at The Commercial UAV Show 2017
FARO Leads in Virtual Reality for Construction, Design and Forensics
RIEGL to Exhibit at Autodesk University 2017
Indoor Reality Announces Revit Plug-in for Rapid Scan to BIM Conversion of Buildings
University Of Southampton Takes Delivery of ASV Global C-CAT 3 Autonomous Vessel
Phase One Industrial Partners with Drone Nerds to Provide Drone-Based Premium Quality Aerial Imaging Solutions
Velodyne LiDAR and BoE Systems Partner for Integrated UAV-Borne LiDAR in Geospatial Data Collection
CDOT Signs Woolpert to $2M Surveying, Right-of-Way Contract
SimActive Automates Direct Georeferencing
GeoSLAM Launches Time & Cost Saving 3D Mobile Laser Scanners at Dallas Fall BIM Forum 2017
Velodyne LiDAR Partners with YellowScan for Integrated LiDAR for UAVs
From the Editor: Taming the Tumultuous Times
Points & Pixels
Shifting Approaches To Landslides
My Drone LiDAR is Better than Yours—The New Geospatial Shiny Object!
Demystifying Smart Cities: How Base Mapping Will Help Navigate Your Future
Hurricane Drones: Anatomy of UAVs in the Eye of Disaster
High Resolution Aerial LiDAR for Design Level Applications
From The Editor: The "S" Word—Standards Print E-mail
Written by Gene Roe   
Saturday, 12 April 2014

A 336Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

With ILMF 2014 and ASPRS 2014 (American Society of Photogrammetry and Remote Sensing) in the books, attention now turns to SPAR 2014 which takes place April 14-17 in Colorado Springs. LiDAR Magazine will be distributed at this important industry event, assuming I can get this editorial finished on time, so let's get on it.

I just had an interesting conversation with a long time friend who is a highly successful AEC software industry veteran and an instinctive observer of the BIG picture. We were discussing a number of recent announcements from the business press about 3D industry start-ups and acquisitions like Facebook buying the virtual reality hardware company Oculus Rift for $2 billion. Even Zuckerberg positioned this as a calculated risk saying, "Oculus has the chance to create the most social platform ever, and change the way we work, play and communicate." The operative word here is "chance".

If you're Facebook, or any of the other major players such as Google then you can afford to take these chances. In fact it is imperative that you do or you end up losing out on the next trend as Microsoft has done on a number of occasions.

We also discussed the challenges being faced by the Google Glass project, noting that Google recently announced a partnership with the world's leading eyeglass manufacturer Luxottica, the maker of Ray-Ban sunglasses. Why, because the average consumer, especially women do not want something like that on their face. You can argue all you want that this does not make sense from a logical point of view, but this is about emotion not logic. Google may find a technical market for Glass, but it will never be a consumer success. I have the scars to prove it.

After going back and forth for a while I commented to my friend that I would not want to be in the 3D sensor start-up space. Things are moving too fast. As Ken Smerz pointed out in a recent LiDAR News webinar you want to position your firm just behind the cutting edge, not on it. Launching a 3D sensor start-up or investing in one today is not the cutting edge; it's the bleeding edge particularly if you are not in Silicon Valley, as my friend pointed out. (For an inside look at the early days of the PC start-ups in Silicon Valley Accidental Empires is a must read.)

Not only do you have to compete with these well funded start-ups you are also competing with academia where the business rules are quite a bit different. Software might be one thing, especially if it is hardware agnostic, but there is just too much risk in hardware right now for my money particularly since there are no standards.

Ah yes, the "S" word, the real subject of this editorial - standards. Reminds me of an article I wrote nearly 20 years ago while working for Blue Marble Geographics entitled, "The R Word--Raster." At that time GIS was all vector and although everyone liked imagery most GIS people did not know how to handle it. In fact at that time Esri had their partner Erdas supply all of the software to support raster data. Arc/Info was vector only.

Now if your first reaction is to think, why are standards important?, I will use my old standby example--the music industry. Can you imagine what it would be like if every DVD manufacturer used a different format? Can you see how valuable it has been to the music industry to have seamless data interoperability? Every once in a while there are some format battles like when Beta competed with VHS as the VCR was first coming on the market, but those are soon resolved in favor of making money.

Railroads are another good example. The ASTM (American Society of Testing Materials) was founded in the late 1800's in part because the various stakeholders could not agree on standards for the steel to manufacture the rails. That was back in the days of the Wild West. Unfortunately that is not unlike what we are seeing today in the 3D industry.

As some of you know I have been involved with the ASTM E57 3D Imaging Systems standards committee since 2006. We have made some progress that includes the E57 data interoperability standard which is being widely supported by hardware and software vendors, but over the past couple of years the progress has been very slow. For those who would like to learn more about E57 there will be a session on Thursday at SPAR that will discuss the current activities of the committee.

I think it is encouraging to note that there are a number of articles in this issue that include references to standards and guidelines such as the TRB Mobile LiDAR report which Chris Siebern highlights in his article. John Russo, the founder of the USIBD (U. S. Institute of Building Documentation) has also been a strong proponent of the needs for standards as can be seen in his article on specifying the level of accuracy. The following are some additional thoughts from John that I wanted to share.

The Need for Standards
The building documentation industry is evolving rapidly. New technologies and processes are being developed at an incredible pace. Issues like specifying level of accuracy are becoming ever more important. So where can we turn to find solutions that help us specify and meet required levels of accuracy while reducing risk for all the stakeholders?

In 2012 a group of national service providers, surveyors, engineers, architects, contractors and owners recognized this and banded together to form the U.S. Institute of Building Documentation (USIBD) www.usibd. org . Since its inception, the USIBD has been working tirelessly to develop and introduce guidelines and standards that can be used by all stakeholders with an interest in building documentation.

The USIBD has announced that it intends to release a draft of its version 1 Level of Accuracy (LOA) specification for public review in April of 2014 prior to the SPAR International Conference in Colorado Springs, CO. The public review period will be open for a period of one month and will provide an opportunity for anyone to contribute feedback to its development. The standard will be published later this year. In addition, for those who are attending SPAR, on Monday, April 14th, 2014 the USIBD will be hosting a free series of workshops which touch on many of the USIBD Standards Committee initiatives including its LOA Specification.

If you are interested in participating more directly in the development of the USIBD's LOA specification or other guidelines and standards please contact the USIBD Standards Committee Chairman, Carlos Velazquez. The USIBD is actively seeking new members who want to contribute to the advancement of the building documentation industry.

Thanks John, the USIBD is doing great work, but all of us involved as volunteers in these efforts can tell you there is a severe lack of support from the industry. Until standards are made a priority by proactively supporting organizations like the ASTM E57 and USIBD the industry will be held back and all of the stakeholders will suffer. It's tough to hear, but it has to be said.

On a closing note I would like to circle back to the earlier comment about the LiDAR News webinar. We recently completed the first in what will be a series of highly educational and practical 3D webinars. If you have an interest in a topic or would like to have your firm sponsor an event please let me know. These will be designed to create immediate value for everyone involved.


Gene Roe, PS, PE, PhD
Managing Editor & Co-Founder LiDAR Magazine

A 336Kb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

< Prev   Next >

Thought Leader: Deploy the Drones!
Chances are you either have a drone or know of a firm deploying them. For two years running, the single largest purchasing intent of LIDAR Magazine readers has been UAS/UAV! Unmanned systems are fast becoming the "sea change" tech of this era--we've highlighted a wide variety of ....
Read the Article
P and Pixels 
Points & Pixels
High Eye Aerial Imaging Acquisition by Alta Vista Ventures Enhances UAV Mapping Opportunities ... CyArk and FARO® announce partnership for use of 3D technology to record heritage at risk ...
Read the Article
Hugh McFall 
How Drones Make Topographic Surveys 6X Faster
Headquartered in Gainesville, Texas, All American Surveying (AAS) is a full-service survey firm run by Jake and JT Thompson. They were recently contracted with all of the survey work for a 90-acre residential development ....
Read the Article
Erik Dahlberg 
Rising Performance
Civil aviation is an outlier. It's among the few industries where tight government regulations are widely accepted--and with good reason. The aviation industry's exceptional record of safety and efficiency comes as a direct result of tightly defined and consistent regulations for ....
Read the Article
Larry Trojak 
Bringing The Goods: Mobile Scanning an Integral Component
When Jim Smith, Jerrad Burns and Charlie Patton left the Memphis division of a major construction company in 2015, they took with them the knowledge of how to get even the most complex jobs done and what equipment could best serve them in making that happen. So ....
Read the Article
Jobe and Letham 
GIS Services are on the Cutting Edge with UAV Collected Imagery
Our GIS mapping services division of the company has been quite active with UAV technology over the last year. We've turned to cutting edge hardware and software solutions to take to the sky and support some of our existing clients (and new ones) with imagery & analysis ....
Read the Article
Sanchit Agarwal 
How Maps Are Making Us Smarter
The evolution of aerial maps is, in many respects, a story of the development of technology. It's also a narrative about human ambition: maps have always been important aids in making key decisions about commercial, military, and imperial goals. Once rare artifacts, they ....
Read the Article
Mitch Caya 
Whole Trees
The benefit of a low-cost, lightweight sensor like the Optech Maverick is its flexibility. The Maverick can profitably handle small projects while more expensive sensors usually stick to large-scale surveys. These smaller jobs are often ....
Read the Article
Matt Wade 
Francois Gervaix Discusses senseFly's New Linear Mapping Release
At the AUVSI Xponential conference in Dallas, senseFly unveiled a new eBee Plus platform enhancement designed to simplify corridor mapping. The company's project lead, Francois Gervaix, explores why documenting linear assets is so challenging and how senseFly Corridor addresses ....
Read the Article
Lewis Graham 
Random Points: Any Bad Points in There?
Some of you reading LIDAR Magazine this month are recipients of airborne LIDAR data, not producers. Rather than being in the thick of the sausage making acquisition and processing chain, you are receiving the data as the end use organization. What should you do? We are the creators of ....
Read the Article



Share this page with your favorite social networks! 


LiDARmag Exclusive Online-only Article ticker
Featured LiDAR MAG Events
List Your Event Here
contact LiDAR


FARO Intros

press [at] lidarmag.com
Online Internet Content


White Papers

post a job
Reach our audience of Professional land surveyors and Geo-Technology professionals with your career ad. Feel free to contact us if you need additional information.

News Feeds

Subscribe to LiDAR MAG updates via friendfeed

Need Help? See this RSS Tutorial

©Spatial Media LLC - All rights reserved / Privacy Statement
Spatial Media LLC
905 W 7th St #331
Frederick MD 21701
301-695-1538 - fax