HomeNewsNewsletterArchivesAuthorsJobsVideoDirectoryTwitterEvents
 
advertisement

eNewsletter

News

remove subscribe

LiDAR Magazine Today


 

follow us on Twitter 

Sponsored By


TAS Lidar Content
TAS Content
Videos
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
Sponsored By


Partner Sites

American Surveyor

machinecontrolonline 

lbszone.com

GISuser.com

GeoJobs.biz

GeoLearn

 

Spatial Media LLC properties

Associates

ASPRS

Connect

LinkedIn Group
twitter
youtube
facebook group
rss

Home   LiDARmag     

Surveyors and Technology Print E-mail
Written by Jody Lounsbury, PS   
Friday, 04 September 2015

A 1.364Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

In the more than 11 years I have worked with 3D Laser Scanning (3DLS) technology, I have witnessed many who embrace the challenge of implementing a new technology flourish while others fail. The practical application of ground-based LIDAR units is still relatively new. The first commercially available units hit the market in the fourth quarter of 1998, and since its introduction, the technology has rapidly advanced on both the hardware and software fronts. Since I began working with the technology in 2004, I've implemented both time of flight and phase-based scanners for a variety of applications, but I continue to be amazed by the technology's rapid growth in the industry.

The first public presentation I gave on 3DLS technology was at my local chapter of NYSAPLS. The first comment was cynical. "There goes another portion of our profession off to a machine," I heard. "Soon they will not need us at all!" Many of my fellow surveyors seem to share the thought that anything new and automated is bad for the profession. I do agree that electronic data-collectors, digital levels, real time GPS networks and other such advances have had a tremendous impact on the art of surveying. These advances have eliminated many basic survey calculations and procedures from the work of younger land surveyors.

My personal experience with the integration of laser scanning with conventional survey techniques has proven to be the exact opposite. The precision and accuracy of the point cloud collected by a laser scanner is directly affected by the integrity of the control network it geo-references. I have heard many professionals comment negatively about laser scanning, claiming it is not surveying and anyone can purchase a system, collect data and produce mapping. The same has been said about GIS data, and the profession is only now acknowledging that we should have been more proactive embracing the technology in its early states. We as a profession find ourselves explaining the fact that a coordinate on an abject is only as good as the method and care by which it was collected. We have all been faced with questions about the property or utility line location portrayed on a municipal website.

My belief is that laser scanning really did not come of age until surveyors became involved with the technology and its applications. Today's groundbased LIDAR systems all began as a result of design professionals and asset owners looking for ways to gather as-built information in process plant applications. The technology has been used in the plant environment since its inception, but only recent advances have adapted the systems to civil/site applications that intrigue many surveyors. The application of our measurement skills to the collection and registration process has helped legitimatize the technology. Manufacturers have developed the individual point accuracy for the hardware allowing surveyors to place that information on the ground. Laser scanning actually boosts the profession by introducing surveyors to new markets that others armed with conventional equipment alone find inaccessible. The introduction of dimensional control to plant and architectural projects increases the value and effectiveness of the data collected, ultimately supplying the client or asset own with a much more comprehensive product.

3DLS technology has helped bring surveyors to the forefront of many new applications that have helped them sustain a profitable business even during these trying economic times. I have spoken to many colleagues that have seen company-wide staff reductions while their 3DLS/Survey groups have held their own by entering new markets. The real-world 3D feel and workings of 3DLS coupled with new market opportunities have also bolstered our profession by generating new interest amongst the younger generations. In the past decade, I have seen a continually growing interest from both large and small universities from around the world.

The "PlayStation" generation looks at 3DLS/Surveying as a new and exciting career opportunity that would have once been overlooked. Over the last few years, there has even been an increase in the media coverage the technology receives. It has been featured as a measurement/documentation tool in educational and crime shows on television as well as in many magazines. I've received numerous phone calls and e-mails from friends craving more information about laser scanning after they saw it featured in something they read or watched on television.

There is, however, a downside to all of this growth. Leaving your comfort zone and entering new markets can be a daunting task. Transitioning from a topographic highway project to a large process plant or building project requires a considerable amount of advanced research and planning. Throughout my laser scanning career, I have had to learn countless new terms relevant to each new field I enter. These changes impact everything related to the project from the proposal and pricing to the execution of field work. By leaving my own comfort zone and venturing into new territory, I have experienced needs for a variety of new safety training, scheduling issues and miscommunication due to industrybased terminology--after all, an entire plant does not consist of just "pipes". Through my journey, I have learned the importance of communication. It's as my second grade teacher aptly said, "There is no such thing as a dumb question." Sometimes you just have to ask.

In addition to the required learning, having the correct hardware or software is a major driver of success in both winning and completing projects. The rapid growth and development of hardware and software is what tends to make this area of the 3DLS field the most complicated. While attending the SPAR conference in Houston, I was amazed at the amount of exhibitors offering an array of brand-new software and hardware, some of which may even become obsolete within the year. The growth in third-party software is playing a major role in how our industry will continue to develop. Today's playing field is very wide in comparison to what it was just 5 years ago.

All of these technological advances lead to many questions, and as a current service provider, you have to decide which path you should or will follow. Today when you pick up a trade magazine or open an email, you're bombarded with an array of new development opportunities including mobile mapping, indoor mapping, UAV mounted scanners, augmented reality, and countless others. These innovative fields all blossomed from conventional 3DLS technologies, and deciding where you fit and the correct business model for your success will assuredly require continued learning and adjustments.

Jody Lounsbury, PLS, is the 3D Laser Scanning Group Manager at CHA. He has more than 28 years of experience in all types of survey applications, the last 12 of which have been focused on the 3D laser scanning industry.

A 1.364Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

 
< Prev   Next >

 

Share this page with your favorite social networks! 

deliciousrssnewsletterlinkedinfacebooktwitter

LiDARmag Exclusive Online-only Article ticker
Featured LiDAR MAG Events
List Your Event Here
please
contact LiDAR

Google
 
LiDAR MAG TOP NEWS


Siteco Road-SIT
& Utility Networks

GOT NEWS? Send To
press [at] lidarmag.com
Online Internet Content

Sponsor


White Papers
Careers

post a job
Reach our audience of Professional land surveyors and Geo-Technology professionals with your career ad. Feel free to contact us if you need additional information.

News Feeds

 
Subscribe to LiDAR MAG updates via friendfeed

Need Help? See this RSS Tutorial






©Spatial Media LLC - All rights reserved / Privacy Statement
Spatial Media LLC
905 W 7th St #331
Frederick MD 21701
301-620-0784
301-695-1538 - fax